固瑞克高级卫生泵采用快拆设计,操作方便,可在五分钟内完成拆卸。可选球阀或瓣阀两种止回阀设计,
配有有 1.5 英寸、2 英寸、3 英寸和 4 英寸的卡箍连接。
● 最大流量达 90 加仑/分钟(341 升/分钟)
● 泵体可360度旋转便于排出残留物料
● 易于清洗、快拆式、可旋转设计
● 配备固瑞克免润滑、无死点运行的空气阀
● 应用于从各种容器中输送流体至分装线,物料粘度最高可达
15000厘泊
● 适用的物料包括水果夹心料、意大利面沙司、松饼或蛋糕面
粉糊、食用油和沐浴露
获得专利的免润滑空气阀
● 移动部件少
● 三向导向阀保证运行无死点
● 无需拆泵可直接在外部快速进行维修,维护成本低
● 气阀设计去除了 O 形圈和柱形阀,杜绝了竞争对手气阀常
见的故障
PTFE/EPDM 一体式膜片
● 固瑞克 PTFE/EPDM 一体式膜片对 PTFE 流体端和 EPDM 空
气端采用一次性整体铸膜,不留任何让细菌滋生的空隙。
● 流体端隔膜板不会暴露在外,从而减少膜片磨损,延长膜片
寿命
● 在磨损性应用中膜片的使用寿命更长
● SaniForce 515、1040、1590、2150 和 SaniForce 1590 HS、
3150 HS 可选配
SaniForce 1590 HS and 1590 3A Diaphragm Pumps
Maximum fluid working pressure
Air pressure operating range
Maximum air consumption
Air consumption at 70 psi, 60 gpm
Maximum free-flow delivery
Maximum pump speed
Gallons/liters per cycle*
Maximum suction lift (varies widely based on ball/seat selection and wear, operating speed, material properties, and other variables)
Maximum size pumpable solids
Air inlet size
Noise Data**
Maximum Noise Level at 100 psi (7 bar, 0.7 MPa), full flow
Sound power level
Noise level at 70 psi (4.8 bar, 0.48 MPa), 50 cpm
Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and o-ring temperature ratings
PTFE
Santoprene®
3A Approved EPDM
Wetted Parts***
All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177.
Wetted materials on all models
Wetted materials depending on model
CAUTION: Santoprene may be used only with non-fatty, non-oily foods or alcohols up to 15%
Non-wetted external parts
Weight
All Models
Loctite® is a registered trademark of the Loctite Corporation.