Overview:
The Pulsation Series T7 was designed to feed chemical products on a timed schedule. Typical
applications include the feed of biocides in open-air cooling towers. The feed cycle is initiated
and controlled by the programmable timer. The Series T7 provides everything you need in one
unique, compact package to create a simple and cost effective metering system for timed applications.
A 7-day programmable timer controls the Series T7. The timer is programmable in 1-minute increments
with up to 8 on/off cycles per day. Each timed event can be set to run any day of the week on a
7-day cycle. Other control features include a standby mode, continuous ‘ON’ mode and the ability
to adjust the stroke length from 0 to 100%. Four distinct models are available, having pressure
capabilities to 100 psi (7.0 bar) @ 12 gpd (1.9 lph), and flow capabilities to 48 gpd (7.6 lph)
@ 50 psi (3.3 bar), with a turndown ratio of 10:1. Metering performance is reproducible to within
± 3% of maximum capacity.
General Specifications:
Pump Head Materials |
GFPPL, PVC, PVDF, 316 SS |
Fitting Material
Available |
GFPPL, PVC, PVDF |
Bleed Valve |
Same as fitting and check valve
selected (except 316SS) |
Turndown Ratio |
10:1 |
Seat O-Rings
Available |
PTFE, CSPE, Viton |
Balls Available |
Ceramic, PTFE, 316 SS, Alloy C |
Diaphragms |
PTFE-faced CSPE-backed |
Tubing Available |
Clear PVC, White PE, PVDF |
Power Input |
115 VAC - 50/60 HZ -1 ph, 230 VAC -
50/60 HZ |
Peak Input Power |
300 Watts, Average Input Power at
Max SPM: 130 Watts |
Average Current Draw |
115 VAC: Amps - 1.0, 230 VAC: Amps
- 0.5 |
Accessories |
Dampeners
Gauges
KOP Kits
Pre-Engineered Systems
Process Controllers
Tanks |
Features:
● Complete timer control in one unique package
● Solid state 7 day electronic timer
● Isolated from earth ground
● Few moving parts and wall mountable
● Safe and easy priming with durable leak-free bleed valve assembly (standard)
资料: